Malaguti X3Mnourd, Руководство по ремонту

Страница: 43 / 50

43
2
Tester ( Ω )
1
3
NO
OK
Tester ( Ω )
2 1
F.45
F. 44
S I G N A L L I N G S Y S T E M S I G N A L L I N G S Y S T E M
NEUTRAL INDICATOR LIGHT DOES NOT COME ON
Check:
1. Neutral switch
2. Instrument board
1. Neutral switch
Connect Tester ( Ω ) as follows:
Terminal (+) of Tester Neutral switch (1) .
Terminal (-) of Tester Chassis grounding (2).
Check continuity as follows:
Transmission in neutral Continuity.
Vehicle in gear No continuity .
•
•
•
•
•
•
Replace neutral switch.
Cable interrupted between neutral switch and
instrument board connector
Resume connection.
See “Wiring diagram” (P.8).
•
•
•
Replace Instrument board
After removing the lead terminal,
make sure the neutral switch is fi rmly
screwed in place.
NO
OK
2. Instrument board
Disconnect instrument board connector (1).
Disconnect lead terminal (2) of neutral switch.
Connect Tester ( Ω ) as follows:
Terminal (+) of Tester Lead terminal (2).
Terminal (-) of Tester Red - black cable PIN 15 (3).
Check continuity.
•
•
•
•
•
•