Malaguti F10, Руководство по обслуживанию, Страница: 10 / 44

03/08 9
IDENTIFICATION DATA: FRAME N° / ENGINE N°
• The body number (A) is stamped on the central body tube and can be viewed by
removing the cover (B).
• Engine identification data are located on the left-hand engine crankcase (C).
Any alteration to the vehicle identification data is pursued by the Law.
TYRES
Type: Tubeless
It is possible to use tyres with load and speed indexes that are higher
than or identical to those indicated.
It is however necessary for speed indexes to be identical for both
tyres. Use only tyres with the relevant type approval.
Minimum tread depth is 2 mm.
• There are T.W.I. marks all around the tyre sides. These correspond to tyre wear
indicators situated in the tyre’s tread; if there is no difference between the
thickness of the tyre wear indicators and the tread depth, the tyre must be
replaced.
Tyre inflation pressure must be adjusted while the tyre is at ambient
temperature.
F.5
F.6
F.7
100/80 - 10” 52J 100/80 - 10” 52J