C
ircuit diagram
P
6
/
8
Insulated connecting
terminal
Brush holder
Lead wire holder
Power supply cord
Housing R
side
Housing L
side
Brush holder
Brush holder
Switch
Wiring to Brush Holder
For easy wiring, set Brush holders on Housing L
as instructed below:
*Brush holder on Switch side -
Face the window of Brush holder towards
Housing R side.
*Brush holder on the opposite side -
Face the window of Brush holder towards
Housing L side.
The Insulated connecting terminals can be
connected from the Ball bearing 627ZZ side
(rear side).
Ball bearing 627ZZ
window of
Brush holder
Wiring in Housing L
For the Market where Radio Interference Suppression is
required
When fixing Lead wires
in this Lead wire holder,
put Choke coil’s lead wire
(
orange
) over Field lead
wire (black).
Choke coil
with Lead wire
(
orange
)
Put Choke coil (
orange
)
in this space.
Route Field lead wires
(black, white) under
Brush holder.
Put Choke coil (
purple
)
in this space.
Choke coil
with Lead wire
(
purple
)
Noise suppressor
Put Noise suppressor
in this space.
