Maktec MT431, Инструкция по эксплуатации, Страница: 4 / 44

4
ENGLISH (Original instructions)
Explanation of general view
1-1. Cutting action changing lever
2-1. Switch trigger
2-2. Lock button
3-1. Blade holder
3-2. Bolt
3-3. Hex wrench
4-1. Bolt
4-2. Roller
4-3. Blade
5-1. Hook
5-2. Hex wrench
6-1. Cutting line 6-2. Base
8-1. Hex wrench
8-2. Bolt
8-3. Base
9-1. Edge
9-2. Graduation
10-1. Hex wrench
10-2. Bolt
10-3. Base
14-1. Hose
15-1. Rip fence (Guide rule)
16-1. Hex wrench 16-2. Bolt
16-3. Fence guide
16-4. Rip fence (Guide rule)
17-1. Threaded knob
17-2. Fence guide
17-3. Rip fence (Guide rule)
17-4. Pin
18-1. Rip fence (Guide rule)
19-1. Anti-splintering device
19-2. Protrusion
SPECIFICATIONS
Model MT431
Length of stroke 18 mm
Blade type B type
Wood 65 mm
Max. cutting capacities
Mild steel 6 mm
Strokes per minute (min
-1
) 0 - 3,100
Overall length 214 mm
Net weight 1.9 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE019-1
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 82 dB(A)
Sound power level (L
WA
) : 93 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : cutting boards
Vibration emission (a
h,CW
) : 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : cutting sheet metal
Vibration emission (a
h,CM
) : 5.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is