R
epair
P 7 / 9
( 3 ) Lay the product. Remove chain with which you secured the motor unit in Fig. 13, from hanger of handle.
See Fig. 15.
( 4 ) Bring the motor unit to the area in which torsion spring does not influence the motor unit any more. See Fig. 15.
( 5 ) Unscrew Hex nut M10-17 and remove spring washer 10, flat washer 10, hex bolt M10-140 and another flat
washer 10. See Fig. 15.
Fig. 16
Fig. 15
Remove chain from
hanger of handle.
Bring the motor unit to the area in which torsion spring does not influence
the motor unit any more.
Hex nut M10-17
Spring washer 10
Flat washer 10
Flat washer 10
Hex bolt M10-140
( 6 ) Remove pipe 20-128 by striking with hammer slightly. Then the motor unit can be separated from base.
See Fig. 16.
No.1R246
Round bar for arbor
Pipe 20-128
Torsion spring 24
