background image

Ex

amples

 

Number of sides

 

Chamfer or Square angle

 

45º 

36º 

30º 

25,7º 

22,5º 

20º 

10 

18º 

Cutting Compound Frames

A composite frame is a cut made using a square angle 
and a chamfer angle at the same time. This type of cut 
used to make frames or boxes with slanted sides.

NOTE:

 if the cutting angle varies from cut to cut, check 

that the chamfer firing button and the square lock 
button are securely tightened. These buttons must be 
pressed after any changes to the chamfer or square 
have been made. The table shown will help to select 
the appropriate settings for chamfer and square for 
cutting common frame compounds.

Cutting of frames

In order to make a proper adjustment, the frames must 
be cut very precisely. The two flat surfaces of a frame 
have angles that, when joined, add exactly 90º. Most 
frames have an upper back angle (the side that goes 
against the flat part) of 52º and a lower back angle 
(the side that goes against the wall) of 38º.
In this case, doing preliminary tests with patchwork of 
frames is very important! Place the lower part (which 
goes against the wall) against the guide of the miter 
saw. Place the upper part (the one that goes against 
the flat part) against the saw table and the frame 
guide.

Instructions for cutting angular frames between 
the guide and the saw table, for all types of cuts:

1. Place the frame so that the bottom

of  this  (the  one  that  goes  against  the  wall  when 
affixed) is against the guide and the upper part of 
the frame against the saw table.

2. 2. The miter plans at the rear of the frame must fit 

directly on the guide and the saw table.

3. 3. Check the cuts so that they are flat, thus 

avoiding free spaces for their accuracy.

INTERNAL CORNER: 

Left side
1. 45º left cut

2. Keep the left side of the cut

Right Side

 

1.

45º

 Right cut

2. Keep the right side of the cut

EXTERNAL CORNER:

 

Left side
3. 45º left cut

4. Save the left side of the cut

Right side
3. 45º straight cut

4. Keep the right side of the cut

SPECIAL CUTS

NEVER MAKE A CUT IF THE MATERIAL IS NOT 
SECURE ON THE TABLE AND GUIDE.

Aluminum Cutting

Use only specific discs for this cut. The instructions for 
aluminum, such as those used to make frames, rails 
etc., can be easily executed with the saw, using a disc 
for cutting non-ferrous metals. Place the material so 
that the thinnest part is exposed to the cut. When 
cutting aluminum, use wax lubricant. Apply the wax 
directly to the disc before cutting. Never apply wax 
when the disc is in motion. The wax available in most 
tool stores or in deposits of industrial suppliers offers 
adequate lubrication and prevents the frames from 
damaging the cutting disc.

 

Make sure you have 

properly fixed the part. Due to their size, shape and 
surface finish, some parts may require

Содержание MK.300.I











Отзывы: