Maksan MKF-4, Инструкция по установке, эксплуатации и обслуживанию, Страница: 22 / 26

21
7. SERVICING
Access to components requiring routine maintenance may be
easily gaind by opening the control panel or removing the LH side
panel and rear panel.
8. TROUBLE SHOOTING
C ertain faults may ocur during normal use of the appliance:
The oven chamber heats inefficiently or not at all.
Causes:
● The cooking temperature regulator has intervened.
● Damage resistances.
● Resistance contacter coil damaged.
● Thermostat sensor damaged (error EPt1)
● Damaged controller.
Oven temperature regulation impossible
Causes:
● Operational thermostat faulty.
Oven switches off
Causes:
● The F1 motor overheating fuse has tripped.
● The F2 control circuit component fuse has tripped.
9. LAYOUT OF MAIN COMPONENETS
(All work inside the appliance must only be carried out by
a trained installer authorised by the manufacturer.
The following components may be easily accessed by
removing the control panel and left side panel of the
appliance:
- Water selonoid valve.
Note:
The control panel may be opened to gain access to all the
appliance’s gas and electrical components, including the
power terminal block (also accessible externally from
underneath the appliance) and the fuse.
● Removing the rear panel gives access to the electrical
motor by removing the exhaust panel and the fan.