Page_24
Pump Coil
It appears when the trigger is pushed forward for ground balancing. Does not indicate any error
or problem. It only indicates what should be done.
Check Coil
It indicates an interruption in the search coil transmitter signal. The search coil connector may be
unattached, loose or disconnected. If you own another detector with the same coil connector,
please be sure that you have not attached the wrong coil by mistake. If none of the above exists,
the search coil or its cable may have a defect. If the issue continues when you change the search
coil, there may be an issue in the coil control circuit.
Makro Detectors reserves the right to change the design, specifications or
accessories without notice and without any obligation or liability whatsoever.
Operating Principle
Operating Frequency
Audio Frequencies
Search Modes
Ground Balance
Pinpoint
Frequency Shift
Sensitivity Setting
Target ID
Audio Boost
Tone Break
Search Coil
Display
Weight
Length
Battery
Warranty
VLF Induction Balance
56 kHz
2 (All Metal)
3 (All Metal/DISC.1/DISC.2)
Automatic / Manual / Tracking
Available
Available
01-99
01-99
Available
Available
26cm x 14cm (10" x 5.5") Waterproof DD
Custom LCD
1.4 kg (3 lbs.) including search coil and batteries
120cm - 140cm (47" - 55 ") adjustable
4 x AA Alkaline
2 years
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Technical Specifications