Makro Detector JeoScan 2D system, Руководство пользователя

Страница: 12 / 24

11
Adjustment of SENSITIVITY Level:
“SETUP” button is pressed for adjusting the level of sound of the device in whatever
mode is it in. The current adjusted sensitivity level is displayed as % on the screen.
Select the “SENSITIVITY” mode by pressing “+” and “-“ keys as described above. After this
mode is selected press the “ACCEPT“ button the sensitivity indicator bar will turn from
yellow into green. Adjust the sensitivity level by pressing “+” and “-“ keys and press
“ACCEPT” button. The green indicator bar turns back into yellow. Now the sensitivity
level is adjusted as you desired and you can switch to the previous mode by pressing
“SETUP” button.
Adjustment of IRON Mode:
“SETUP” button is pressed for switching the level of IRON mode of the device on and off
in whatever mode is it in. The current IRON mode is displayed as open or closed.
You may find more detailed information about the properties of this mode and how it is
used in following sections.
Using the RESET Button:
When the device is in use some interference may
occur due to the environment or unbalanced search
coil movement. These interferences start to show
on the screen and cause the device to give a sound
alarm. Resetting can be done by pressing the
“RESET” button on the system box. By resetting the
effects of interference are eliminated. Resetting
should not be done when the search coil is over the
target!
This will cause loss of depth,
misinterpretation of received signal and the target become invisible to the device.
Resetting procedure is carried out after the search coil is removed away from the
target.