1. SAFETY INSTRUCTIONS AND WARNINGS:
The equipment complies with the safety regulations required for electrical equipment.
Read through the instructions for use before starting up the equipment.
Improper use can lead to personal Injury and properly damage. Persons who are not familiar with the
instructions may not operate the equipment. Keep the instructions for use in safe custody. Children
and youths are not permitted to operate the equipment
2. ACCESSORIES:
This Sliding Mitre Saw is supplied with the following accessories:
Saw Blade – 60 tooth (fitted)
Dust Collection Bag
Work Clamp
Side Support Bar (2x)
Hex Key (for blade changing)
3. MACHINE COMPONENTS:
1. Laser
2. ON/OFF switch for the laser light
3. Laser cover
4. Laser adjustment
5. Sawing arm
6. Release knob
7. Control lever
8. Carry handle
9. Top guard (fixed)
10. Hold Down Clamp
11. Lock for hold down clamp (2x)
12. Swinging lower guard
13. Guard control arm
14. Cover for saw blade screws
15. Chip bag
16. Vertical angle lock
17. Vertical angle scale
18. Stop
19. Hexagonal wrench
20. Mitre bench
21. Mitre scale
22. Bench insert (slotted pate)
23. ON/OFF switch for machine
24. Mitre angle lock
25. Spindle locking button
26. Outlet for dust extractor
27. Guide rails
28. Slide lock
29. Setting screw for cutting depth
30. Depth stop
31. Lock nut
32. Setting screw for sawing head angle
33. Stopper for 90° lock
34. Release lever for saw blade guard
35. Side supports (2x)
36. Positioning holes for side supports (2 pr)
4. PROPER USE:
This machine is designed for crosscutting wood and plastic in sizes corresponding to the machine size.
It is not suitable for cutting firewood.
Use only saw blades which are suitable for the machine. Do not use cutting discs.
The manufacturer assumes no liability whatsoever for improper use, or if the machine has been
tampered with.
Give equal attention to the safety instructions, assembly and operating instructions as well as all
prevailing accident preventions regulations.