Mako SROM 1176, Инструкция по эксплуатации, Страница: 10 / 12

1. Ensure tool is turned OFF and the plug is removed from the
socket.
2. Press the Spindle Lock and rotate the spindle by hand until
the lock engages fully.
3. Use the provided spanner, loosen the Collet Nut and
remove it.
4. Release the Spindle Lock and insert the shank of the
Accessory into the Collet. Use the correct sized Collet and
ensure that the accessory is fully inserted.
5. Lock the spindle again and tighten the Collet Nut finger tight
and then nip it up with the spanner.
Do not over-tighten;
the tool will be damaged.
Changing Type 2 Accessories:
(accessories fitted to a fixed mandrel, such as sanding tubes,
cut-off wheels, polishing mops)
Different types of mandrels are provided to suit different types
of accessory -

For accessories with small center hole – cut-off wheels,
grinding discs, sanding discs:
1. Ensure tool is turned OFF and the plug is removed from
the socket.
2. Press the Spindle Lock and rotate the spindle by hand
until the lock engages fully.
3. Fit the mandrel to the Collet Chuck as for Type 1
Accessory.
4. Unscrew the fixing screw in the end of the mandrel and
fit the disc. Ensure the disc is correctly located on the
mandrel. Replace the screw.
5. Press the Spindle Lock and tighten the screw.

For accessories with no center hole – cloth or wool
polishing mops:
1. Ensure tool is turned OFF and the plug is removed from
the socket.
2. Press the Spindle Lock and rotate the spindle by hand
until the lock engages fully.
3. Fit the mandrel with the self-tapping screw end to the
Collet Chuck as for Type 1 Accessory.
4. Center the mop on the screw and turn onto the
mandrel.
5. Press the Spindle Lock and tighten the mop down fully
down onto the screw.

For sanding bands:
1. Ensure tool is turned OFF and the plug is removed from
the socket.
2. Press the Spindle Lock and rotate the spindle by hand
until the lock engages fully.
3. Fit the mandrel with the rubber sleeve to the Collet
Chuck as for Type 1 Accessory.
4. Slide the sanding band onto the rubber sleeve on the
mandrel.
5. Press the Spindle Lock and tighten the screw to expand
the rubber tire inside the band.