Makita XRM03, Инструкция по эксплуатации, Страница: 8 / 28

8
4. Rotate the Tuning control to tune to a station. The
FM frequency will change in steps of 100 kHz/50 kHz
and AM frequency will change in steps of 10 kHz.
5. When the end of the waveband is reached your radio
will recommence tuning from the opposite end of the
waveband.
6. Use the Tuning control to adjust the sound level
as required.
Presetting stations in AM/FM
mode
There are 5 preset stations each for AM and FM radio.
They are used in the same way for each waveband.
1. Press the Power button to switch on your radio.
2. Press the Source button to select the desired
waveband. Tune to the required radio station as
previously described.
3. Press and hold the required Preset button (1 to 5)
until the display shows “P4” for
example after the frequency. The station will be stored
using the preset number. Repeat this procedure for
the remaining presets as you wish.
4. Preset stations which have already been stored may
be overwritten by following the above procedure if
required.
Display modes — FM
Your radio has a range of display options for FM radio
mode.
1. Repeatedly press the Menu/Info button to view
the RDS information of the station you are listening to.
a. Station name Displays the name if the station being
listened to.
b. Program type Displays the type of station being
listened to such as Pop, Classic, News,
etc.
c. Radio text Displays radio text message such as
new items etc.
d. Year/Day Displays the year and day of the week
according to the date setting of your
radio.
e. Date/Day Displays the date and day of the week
according to the date setting of your
radio.
f. Frequency Displays the frequency of the FM for
the station listened to.
FM stereo (auto)/mono
If the FM radio station being listened to has a weak signal
some hiss may be audible. It is possible to reduce this
hiss by forcing the radio to play the station in mono rather
than stereo.
1. Press the Source button as needed to select the
FM band and tune to the desired FM station as
previously stated.
2. Press and hold Menu/Info button to enter the
menu setting.
3. Rotate the Tuning control until the FM Auto/mono
setting shows on the display. If the setting is Auto
press the Tuning control to switch to Mono mode to
reduce the hiss. Press the Tuning control to select the
option.
Recalling a preset in AM/FM mode
1. Press the Power button to switch on your radio.
2. Press the Source button to select AM or FM radio
mode.
3. Momentarily press the required Preset button
to cause your radio to tune to one of
the stations stored in the preset memory.
iPod docking
Your radio has an iPod docking facility which allows you
to play digital audio files and soundtracks held on your
iPod/iPhone directly.
Your radio uses the iPod Universal Dock adjustor
developed for use with iPods and iPhone. Recent models
of iPod/iPhone are supplied with Universal Dock Adapter
inserts which ensure correct alignment of the iPod/iPhone
with the electrical connector.
Important:
The radio does not support iPod 3rd generation (build
2003-2004). To avoid possible damage to your iPod,
do not use your iPod with the product without the
correct adapter fitted to the radio.
Note:
1) All the model listed in the following can be connected
to your radio, but not for iPod shuffle: (1) iPhone 4S
(2) iPhone 4 (3) iPhone 3GS (4) iPod touch 4G
(5) iPod touch 3G (6) iPod nano 6G (7) iPod nano 5G
(8) iPod classic
2) Models listed above have been certified by the
developer to meet Apple performance standards. The
models which are not listed above can also operate
with your XRM03; however, there is no certification to
meet Apple performance standards.
Charging your iPod/iPhone
1. Place the iPod/iPhone onto the Universal Dock
Adjuster into the iPod docking compartment. Press the
Power button
to switch on your radio.
2. Press Source button until “iPod” shows on the
display. If you see (battery with thunder) on your iPod
screen, it indicates your radio is charging your iPod’s/
iPhone’s internal battery.