Makita XRM02 Скачать руководство пользователя страница 9

Recall stations from preset 
memories

1.

Press the Power button to turn on the radio.

2.

Select the required waveband.

3.

Momentarily press the required Preset button, the 
preset number and station frequency will appear in the 
display.

Setting the radio alarm

When the radio alarm is selected, the radio will turn on 
and play the chosen radio station at the chosen alarm 
time. The radio alarm will continue for one hour unless 
turned off by pressing the Power button. Pressing the 
Power button whilst the alarm is activated will cancel the 
alarm for 24 hours.

Note:

When the radio is in low battery status, the radio alarm 
can’t be activated.

a. Setting radio alarm time:

1.

The radio alarm can be set either when radio is on or
off.

2.

Press and release radio alarm button

, the 

radio alarm symbol will flash.

3.

During radio alarm symbol flashing, press 

 button 

for more than 2 seconds followed by a beep.

4.

Display Hour will flash, rotate Tuning/Volume control 
knob to select the hour then press

 button again 

to confirm hour setting.

5.

Follow same procedures of setting hour to set 
required minute. Press 

 button to complete alarm 

time setting.

b. Setting radio alarmed station

1.

During setting radio alarm time and radio alarm 
symbol is flashing, press Band button to activate the 
radio to select required wake-up band and station by 
manual tuning and recall the preset stations. Press 

 button to complete radio alarm setting. 

Display will show 

.

2.

When above radio alarm time and station are set, 
press and hold down radio alarm button 

 for 

2 seconds followed by a beep to switch alarm on or
off. Display will show 

 when radio alarm is set.

Note:

If new radio alarm station is not selected, it will select 
the last alarm station.

Setting the HWS (Humane Wake 
System) buzzer alarm

A beep tone will activate when selecting the HWS buzzer 
alarm.
The alarm beep will become shorter every 15 seconds for 
one minute followed by one minute silence before 
repeating the cycle.

The HWS alarm will sound for one hour until turning off by 
pressing the Power button. Press the Power button whilst 
the alarm is activated will cancel the alarm for 24 hours.

1.

The HWS buzzer alarm can be set either radio is on or 
off.

2.

Press and release the HWS buzzer alarm button 

, the symbol will flash.

3.

During the symbol flashes, long pressing the 
button for more than 2 seconds followed by a beep 
and display Hour digit will flash.

4.

Rotate Tuning/Volume control knob to select required
alarm hour, then press time set button 

 again. The 

minute digit will then flash.

5.

Rotate Tuning/Volume control knob to select required
alarm minute, the press time set button 

 again to 

complete HWS buzzer alarm setting.

6.

Press and hold down buzzer alarm button 

 for 

more than 2 seconds followed by a beep to switch on 
or off the HWS buzzer alarm.
Display will appear 

 when buzzer alarm has 

been set.

Snooze function

1.

Whilst the alarm is activated, pressing any buttons 
except the Power button will activate the snooze 
function. The radio or HWS buzzer alarm will be 
silenced with interval of 5 minutes.

2.

The display will flash both the snooze symbol

 and 

the alarm symbol. The snooze function can be 
repeatedly during one hour that the alarms are active.

Sleep function

The sleep timer will automatically switched off the radio 
after a preset time has elapsed.

1.

Press and continue to hold down the Power button for 
more than 2 seconds, followed by a beep tone, the 
display will cycle through the available sleep times in 
the order 60-45-30-15-120-90-60.
Release the Power button when the required sleep 
time appears in the display. The symbol 

 will 

appear in the display and the radio will play the last 
station selected.

2.

To cancel the sleep function, press the Power button. 
The Symbol will disappear and radio is off.

Display illumination

Press any buttons or rotate Tuning/Volume control knob 
will illuminate the LCD display for approx. 15 seconds. 
During scanning stations and alarm activated, will also 
automatically illuminate the display.

Change Stereo to Mono

When the stereo FM station reception is weak, you can 
improve it by pressing Mono button for 2 seconds. The 
sound is no longer in stereo and stereo indicator 
disappears.

Содержание XRM02











Отзывы: