2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
XPG01
Rated voltage
D.C. 18 V
Grease capacity (with A-type barrel) Cartridge
410 g (14.5 oz)
Bulk
455 g (16.0 oz)
Grease capacity (with B-type barrel) Cartridge
450 g (15.9 oz)
Bulk
570 g (20.1 oz)
Maximum operating pressure
69 MPa (10,000 psi)
Maximum flow rate
Slow speed mode
145 ml/min (5.0 fl oz/min)
Auto speed mode
290 ml/min (10.0 fl oz/min)
Applicable grease type
NLGI No.0 - No.2
Hose length
1,200 mm (47-1/4")
Overall length
With A-type barrel
411 mm (16-1/4")
With B-type barrel
449 mm (17-3/4")
Net weight
4.8 - 6.1 kg (10.6 - 13.4 lbs)
NOTE:
The barrel type (A-type or B-type) varies depending on the country.
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool.
Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
Electrical Safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs
and matching outlets will reduce risk of electric shock.
2.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3.
Do not expose power tools to rain or wet conditions.
Water
entering a power tool will increase the risk of electric shock.
4.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
