10 ENGLISH
4.
Prepare the crank and new shear blades.
1
2
►
1.
Crank
2.
Shear blades
5.
Remove the blade cover, and then attach it to the
new shear blades.
6.
Apply a small amount of grease to the periphery of
the crank. Attach the washer, gear, and the crank to the
pin in order.
1
2
3
4
►
1.
Crank
2.
Gear
3.
Washer
4.
Pin
7.
Adjust the crank so that the 2 small holes on the crank
are lined up on the alignment line as shown in the figure.
1
2
►
1.
Alignment line
2.
Small hole
8.
Slide the shear blades so that the hole on the
guide plate is positioned at the center of the rings of
blades.
1
►
1.
Guide plate
9.
Insert the screw removed in step 2 into the hole on
the shear blades through the hole on the blade cover.
1
►
1.
Hole
