Makita XGT AC001G, Инструкция по эксплуатации

Страница: 13 / 184

13 ENGLISH
Recommended interval of inspection and maintenance
Inspect and maintain the compressor within the period as described in the following table.
Part Action Daily
(before/after use)
Weekly Monthly Quarterly
Overall Inspect for unusual
noise and vibration
- - -
Clean off dirt and
dust with dry air.
- - -
Air lines and fittings Inspect for leakage - - -
Air tank Exhaust all air and
drain condensation
in the air tank. (open
the drain valve.)
- - -
Inspect for
scratches, dents, or
leakage.
- - -
Inspect rust, pin
holes, or other
imperfections that
could cause it to
become unsafe.
- - -
Bolts and nuts Inspect for
tightness.
- - -
Handle Wipe off oil and
grease.
- - -
Cut-out pressure Check and adjust. - - -
Air filter Clean or replace if
necessary.
- - -
Lubrication
This air compressor is equipped with an Oil-Less pump
designed for durability and no maintenance.
Storage
Before you store the air compressor, make sure you do
the following:
•
Review the “MAINTENANCE” and “OPEATION”
sections and perform maintenance as necessary.
Be sure to drain water from the air tank.
• Protect the air hose from damage (such as being
stepped on or run over).
Store the air compressor in a clean and dry location.