Makita VC3012LX1, Оригинальная инструкция по эксплуатации, Страница: 13 / 17

D
GB
F
NL
I
N
S
DK
SF
E
P
GR
TR
SLO
HR
SK
CZ
PL
H
RO
BG
RUS
EST
LV
LT
AL
MK
SR
UK
19
Makita VC3012L
During maintenance and repair work all contaminated parts that could not be cleaned satisfactorily
must be
– packed in well sealed bags
– disposed of in a manner that complies with valid regulations for such waste removal
A dust test must be performed at least once every year by Makita service or a trained person. This test
includes, for example, whether there is damage to the filter, the vacuum cleaner is sealed to the air
and the control equipment works properly.
Disposal of filter elements, filter bags and disposal bags
Discard filter elements, filter bags and disposal bags in accordance with the national regulations.
Transport
Before transporting the dirt tank, close all the locks. Do not tilt the cleaner if there is liquid in the dirt
tank. Do not use a crane hook to lift the cleaner.
Storage
Store the appliance in a dry place, protected from rain and frost. The machine shall be stored indoors
only. Wet filters and the interior part of the liquid container shall be dried before storage.
Recycling the vacuum cleaner
As specified in European Directive 2012/19/EC on old electrical and electronic appliances,
used electrical goods must be collected separately and recycled ecologically. Contact your local
authorities or your nearest dealer for further information.
Guarantee
Our general conditions of business are applicable with regard to the guarantee. Subject to change as a
result of technical alterations.
Spare parts and accessories
Description Order no.
Filter element P-70219
Fleece filter bag 107418007
Disposal bag P-70297
Exploded drawings and parts lists are available on our homepage: www.makita.com
Troubleshooting
Fault Cause Remedy
‡ Motor does not start > Fuse in mains plug has blown. • Reset the fuse.
> Overload protection switch has
tripped.
• Switch off the vacuum cleaner
and allow it to cool for approx. 5
minutes. If it can not be started
again, contact the Makita
service department.
‡ Motor does not run in
automatic mode
> Power tool is defective or not
connected properly.
• Check that the power tool
works or that the plug is
inserted correctly.
‡ Reduced suction power > Suction power selected with
suction power control is to low.
• Set suction power in
accordance with section
“Suction power control”.
> Clogged suction hose/nozzle. • Clean suction hose/nozzle.