R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Lifter section
P
5
/
7
DISASSEMBLING
Fig. 14
ASSEMBLING
Refer to the clause of [3]-2.
Switch lever A
Switch lever C
Rod
Link
Gear housing complete
Lever
Refer to
Fig. 14
.
Three plates X, Y and Z of Lifter have to be linked with each appropriate portion in the following order.
1. Plate X is fit into the U groove of Pusher cap.
2. Plate Y is put on the hook portion of Lever.
3. Plate Z is fit into the groove of Switch lever A.
Set the components in place while pay attention to the linked portions illustrated in
Fig. 14.
X
X
Y
Y
Z
Z
Insulation cap
Compression
spring 8
Pin 5 (to the hole of
Gear housing complete
through Cap holder,
Lifter and Pin holder)
Cap
holder
Rod 3 (for pushing
Link)
Lifter
Pin
holder
Pusher cap