![background image](http://html.mh-extra.com/html/makita/uh4570/uh4570_instruction-manual_233080007.webp)
7
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
END220-1
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual and follow the
warnings and safety instructions.
Wear eye protection.
Wear ear protection.
DOUBLE INSULATION
Caution: particular care and attention
required!
Caution: withdraw the mains plug
immediately if the cable is damaged!
Protect against rain and damp!
Wear safety gloves!
Withdraw the mains plug!
First aid
Recycling
CE marking
............. Prohibited!
Intended use
ENE014-1
The tool is intended for trimming hedges.
General Power Tool Safety
Warnings
GEA005-2
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool.
Distractions can cause you
to lose control.
1.
Switch trigger B
2.
Switch trigger A
3.
Switch trigger C
4.
Hook complete
5.
Tool’s cord
6.
Extension cord
7.
Hook
8.
Tool
9.
Holder
10. Waist cord hook
11. Cord
12. Arm cord hook
13. Trimming direction
14. Tilt the blades
15. Hedge surface to be trimmed
16. Press
17. Chip receiver
18. Nut
19. Shear blade
20. Branch catcher
21. Hooks
22. Fit the hooks into groove
23. Grooves
24. Press the hooks on both sides
25. Unlock the hooks
26. Screws
27. Blade cover
28. Under cover
29. Gear housing cover
30. Crank
31. Ellipse of shear blade
Model
UH4570
UH5570
UH6570
Blade length
450 mm
550 mm
650 mm
Strokes per minute (min
-1
)
1,600
1,600
1,600
Overall length
862 mm
970 mm
1,042 mm
Net weight
3.5 kg
3.6 kg
3.7 kg
Safety class
/II
Содержание UH4570
