TDG-BR100/BR50 4-198-235-21(1)
(GB)
TDG-BR100/BR50 4-198-235-21(1)
Slide Switch (TDG-BR100 only)
Increases the width of the glasses
Decreases the width of the glasses
Set both the switches on either side for a
comfortable fit. Close the temple frames
slightly inwards to set the switch.
Battery Cover
Detaching or opening the cover when replacing the battery.
LED indicator
Flashes one time every 3 seconds: Power on
Flashes three times every 3 seconds: Low battery: Battery capacity is almost
running out.
Flashes three times: Power off
IR Sensor
Receiving signals from the 3D Sync Transmitter.
This part receives IR
(infrared rays) from the
3D Sync Transmitter.
IR’s entry angle differs according to distance or usage environment.
Note
Please keep the IR Sensor clean.
Power Button
Power on: Press once
Power off: Hold power button down for 2 seconds
* Auto power off: More than 5 minutes without IR signal
Nose pad (TDG-BR100 only)
Adjust the nose pad for a comfortable fit.
Temple frames (TDG-BR100 only)
You can bend (adjust) the temple frames for a comfortable fit.
