3 / 7
2
CAUTION
Repair the machine in accordance with "Instruction manual" or "Safety instructions".
Follow the instructions described below in advance before repairing:
Wear ESD Anti-static electronics gloves.
In order to avoid wrong reassembly, draw or write down where and how the parts are assembled, and what the parts are.
It is also recommended to have boxes ready to keep disassembled parts by group.
Handle the disassembled parts carefully. Clean and wash them properly.
Remove Battery, except when it is necessary to check the operation of machine.
This model is part-replaceable only for Window frame (Lens), Keypad (Switch), Screws, Labels and DC Jack cover.
If all lasers do not light up, you may be able to repair with a switch-change, but you will not be able to repair if some
lasers do not light up. Prior to repair, understand the symptom of the trouble and determine whether the REPAIR is
feasible or not.
The label covering the head of the screw holes is stuck. Arrange the label for repair.
Model SK106D and SK106GD are laser adjustable. Refer to the dedicated manual for the laser adjustment method.
The screws are shipped in units of 10 pcs.
Window frame (Lens) contains Screws (4 pcs) and Label.
3
NECESSARY REPAIRING TOOLS
Description
Use for
T8 Hexalobular driver
assembling Main housing
T6 Hexalobular driver
assembling Window frame (Lens) and Battery holder
Slotted screwdriver
removing Label
4
TIGHTENING TORQUE SPECIFICATIONS
Fastener
Tightening torque (N∙m)
T6 Tapping screw
0.3±0.03
T8 Tapping screw
0.4±0.03
