![background image](http://html1.mh-extra.com/html/makita/rs002gd201/rs002gd201_instruction-manual_4264931013.webp)
13 ENGLISH
WARNING:
BE SURE TO TIGHTEN THE HEX
BOLT COUNTERCLOCKWISE SECURELY. Also
be careful not to tighten the bolt forcibly. Slipping
your hand from the hex wrench can cause a per-
sonal injury.
WARNING:
If the ring is needed to mount the
circular saw blade onto the spindle, always be
sure that the correct ring for the blade's arbor
hole you intend to use is installed between the
inner and the outer flanges.
Use of the incorrect
arbor hole ring may result in the improper mounting of
the circular saw blade causing blade movement and
severe vibration resulting in possible loss of control
during operation and in serious personal injury.
Blade guard cleaning
When changing the circular saw blade, make sure to
also clean the upper and lower blade guards of accu-
mulated sawdust as discussed in the Maintenance
section. Such efforts do not replace the need to check
lower guard operation before each use.
Installing side grip (handle)
CAUTION:
Always be sure that the side grip is
installed securely before operation.
CAUTION:
Remove the side grip (handle)
when operating bevel cutting. If you operate bevel
cutting with the side grip (handle), it may touch
the workpiece or your body and cause kickback
or personal injury.
CAUTION:
Be careful not to hit your fingers
against the side grip (handle) when opening/clos-
ing the lower guard.
The side grip (handle) is helpful for holding and carrying
the tool.
To install the side grip (handle), screw the side grip
securely on the position of the tool as shown in the
figure.
1
►
1.
Side grip (handle)
Connecting a vacuum cleaner
Optional accessory
CAUTION:
Be careful not to let the hose
entangled with the workpiece.
It may result in seri
-
ous personal injury due to kickback.
NOTE:
To prevent the rubber cap from being lost,
store it on the front of the tool.
NOTE:
When not using the vacuum cleaner, attach
the rubber cap onto the dust nozzle.
Remove the rubber cap from the dust nozzle and con-
nect the vacuum cleaner's hose as illustrated.
1
►
1.
Rubber cap
Connect a Makita vacuum cleaner to your tool.
1
4
3
2
►
1.
Rubber cap
2.
Vacuum cleaner
3.
Hose
4.
Dust
nozzle
Содержание RS002GD201
Страница 1: ...INSTRUCTION MANUAL Cordless Rear Handle Saw RS002G ENGLISH Original instructions Read before use ...
Страница 22: ...22 ...
Страница 23: ...23 ...