W
iring diagram
P 6 / 6
Sponge
Sponge for dust protector
installed in knob R
Wiring in knob R
Lock
off button
Trigger
Pass lead wires to be connected to
switch, as per the illustration.
A : View from top
B : View from
knob R side
B : View from knob R side
Model RP0910
A : View from top
Lead wire of noise suppressor
with transparent sheath
Pass lead wire of noise suppressor
with transparent sheath, between
boss and rib.
Rib
Boss
Pass lead wire of support (field)and
the same of noise suppressor with
transparent sheath, in the groove.
Put insulated terminal
and slacked lead wires
in this place as per
the illustration.
Boss
Noise
suppressor
Set noise suppressor as per
the illustrated position.
When noise suppressor without
grounding wire (covered with
transparent sheath) is used,
cover the noise suppressor
with sponge.
Fix lead wires to be connected to
terminal block, with lead holder.
And set the lead wires of noise suppressor
inside of the machine (armature side), when
fixing them with lead holder.
