[4] DISASSEMBLY/ ASSEMBLY
[4]-2. Engine and Shaft
[4]-3. Protector assembly, Bike handle
(1) Remove M6x22 Hex socket head bolt that fastens Earth terminal to Clutch case complete.
Disconnect Bullet terminals of Lead wires. (
Fig. 1
)
(2) Loosen Mixing cap of Carburetor, then remove Piston valve from Carburetor. Push Piston valve against
the spring force to separate the cable end from Piston valve. (
Fig. 2
)
(3) Remove the rest of M6x22 Hex socket head bolts to separate Engine from Clutch case. (
Fig. 3
)
DISASSEMBLING
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Earth terminal
Clutch case complete
(1) Remove two M6x30 Hex head bolts (A) and Protector. (
Fig. 4
)
(2) Loosen M6x30 Hex socket head bolt (B) on the neck of
Gear case assembly, and then remove two M5x14 Hex socket
head screws.
Pull out Gear case assembly from the end of Shaft pipe complete.
(3) Remove two M6x30 Hex socket head bolts to separate Handle
section from Shaft pipe complete. (
Fig. 5
)
Assemble by reversing the disassembly procedure.
ASSEMBLING
Assemble by reversing the disassembly procedure.
ASSEMBLING
DISASSEMBLING
R
epair
P 3/ 15
M6x22 Hex
socket head bolt
M6x22 Hex
socket head bolt
(3 pcs.)
Clutch case complete
Bullet terminals
of Lead wires
Control cable
Piston valve
The end of
Control cable
Spring
Mixing cap
Carburetor
M6x30 Hex
socket head
screw (2 pcs.): A
M5x14 Hex
socket head
screw (2 pcs.)
Protector clamp
M6x30 Hex socket head bolt: B
Protector
Gear case assembly
Shaft pipe complete
Fig. 5
M6x30 Hex
socket head
bolt (2 pcs.)
Shaft pipe
complete