R
epair
P 7 / 9
( 1 ) Separate blade case section, after removing brush holder cap and carbon brush.
And remove handle cover. See Fig. 20.
The distance between blade case and handle is too small to approach strain relief with screwdriver.
Power supply cord can be replaced as illustrated below.
However, if the screwdriver as illustrated in Fig. A, is used, the power supply cord can be removed
without separating the blade case section.
( 2 ) Remove strain relief by unscrewing 2 pcs. of tapping screw 4x18. See Fig. 21.
( 3 ) Remove power supply cord. See Fig. 22.
Lock ON button
Switch
Strain
relief
Tapping screw 4x18
(2 pcs.)
(Lock OFF button)
< 5 > Replacing power supply cord
Fig. 20
Fig. 21
Fig. 22
Pan head
screw M5x50 (4 pcs.)
Tapping
screw 4x18
(5 pcs.)
Carbon brush
Handle cover
Power supply
cord
Cord guard
smaller than 50mm
Fig. A