W
iring diagram
P
9
/
9
Fig. D-3
Fig. D-4
Wiring to Switch
Wiring in Handle Set (L)
Rib A
Rib B
Power supply cord
Rib C
Noise suppressor
(if it is used)
Connect connectors for Field lead wires
to Switch terminals of Handle set (L) side
while facing their Wire connecting portions
to Motor housing side.
Switch
Field lead wire
Noise suppressor
Connect Noise suppressor’s lead wires to Switch terminal
from the same direction as Field lead wires while facing
their wire connecting portions to Handle set(L) side.
Note
: Noise suppressor is not used for some countries.
Put Lead wire (black or brown)
between Ribs A and B.
Do not put Noise suppressor’s
Lead wires (2 whites) on
Field Lead wires (2 blacks).
Put the slag portion of Field lead wires in this position.
Note
: The slag portion can be also put in the space for
Noise suppressor if it is not used.
Pass Field lead wires (2 blacks)
through the groove.
Do not slag Field lead wires
(2 blacks) in Motor housing.
Put Noise suppressor’s Lead wire
(white) and Field Lead wire (black)
between Ribs A and C.
