
4 ENGLISH
FUNCTIONAL
DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
1
2
►
1.
Switch trigger
2.
Lock button
CAUTION:
•
Before plugging in the tool, always check to see
the switch trigger actuates properly and returns
to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Installing or removing drill bit
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before installing or removing the bit.
1
►
1.
Chuck key
To install the bit, place it in the chuck as far as it will go.
Tighten the chuck by hand. Place the chuck key in each
of the three holes and tighten clockwise. Be sure to
tighten all three chuck holes evenly.
To remove the bit, turn the chuck key counterclockwise
in just one hole, then loosen the chuck by hand.
Installing side grip (auxiliary handle)
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before installing or removing the side
grip.
1
2
3
4
5
6
►
1.
Grip base
2.
Teeth
3.
Side grip (auxiliary handle)
4.
Protrusion
5.
Loosen
6.
Tighten
Always use the side grip to ensure operating safety.
Install the side grip so that the teeth on the grip fit in
between the protrusions on the tool barrel. Then tighten
the grip by turning clockwise at the desired position. It
may be swung 360° so as to be secured at any position.
Installing drill chuck (for model
M6202X)
CAUTION:
•
Accessories must match the spindle thread of
1/2" - 20 UNF. Accessories that do not match
the spindle thread will run out of balance, vibrate
excessively and may cause loss of control.
Содержание M6202
Страница 1: ...INSTRUCTION MANUAL Drill M6202 ENGLISH Original instructions DOUBLE INSULATION Read before use ...
Страница 6: ...6 ...
Страница 7: ...7 ...
Страница 8: ...Makita Corporation www makita com 885591 0 EN 20170404 ...