W
iring diagram
P 9/ 10
Fig. D-4
Top view
Lead wire holder
Terminal block
Switch
Rib C
Rib D
Route Field lead wire (white) to
Terminal block through the space
between Ribs B and C as well as
C and D.
Rib B
Rib A
Switch
Closed end splice
When Terminal block is used
When Closed end splice is used
Route Field lead wires (white,
black) inside of Rib A.
When fixing Lead wires in this
Lead wire holder, Field lead
wire (white) must be put over
Field lead wire (black).
Lead wire holder
Pull out Field lead wires (white, black)
so that they are tightened in Motor
housing and put the slack portion of
White lead wire in this place.
When fixing Lead wires in this
Lead wire holder, Field lead
wire (white) must be put over
Field lead wire (black).
Pull out Field lead wires (white, black)
so that they are tightened in Motor
housing and put the slack portion of
these lead wires in this place.
