![background image](http://html1.mh-extra.com/html/makita/ls1016/ls1016_technical-information_4043363034.webp)
Case of Power
supply circuit
Pass Lead wires from Motor housing
through the notch of Handle.
Wiring in Motor Housing and Handle for
220 - 240V
area
where Radio Interference suppression is not required.
Switch for protection
of brake coil
Controller
Insulated terminal
Field Lead wires
* (orange)
* (black)
* (yellow)
Field Lead wire (white)
Field Lead wire (purple)
Do not put Lead wires on
these ribs.
ribs for Laser
switch unit
rib
Do not route Field lead wires
(white and purple) between
Armature and Baffle plate.
Connection of Receptacles
Receptacles
Receptacles have to be connected
so that their wire connecting
portions face the bottom of Handle.
Bottom of Handle
Wire connecting portion
Fig. D-2D
Field lead wires have to be tightened
in the Motor housing so as not to
touch Armature.
Pass Lead wires through ribs as illustrated.
Do not put their Lead wires on the ribs.
W
iring diagram
P 3
4/ 37