Makita LS0814, Инструкция по эксплуатации

Страница: 2 / 32

2
SPECIFICATIONS
Model ..................................................................................................................................LS0814/LS0814F/LS0814FL
Blade diameter.................................................................................................................................................... 216 mm
Hole (arbor) diameter
For all countries other than European countries ................................................................................ 25 mm or 25.4 mm
For European countries ........................................................................................................................................ 30 mm
Max. Miter angle ................................................................................................................................. Left 47°, Right 57°
Max. Bevel angle................................................................................................................................. Left 45°, Right 45°
Max. Cutting capacities (H x W) with blade 216 mm in diameter.
(Note)
* mark indicates that a wood facing with the following thickness is used.
1: When using a wood facing 25 mm thick.
2: When using a wood facing 20 mm thick.
3: When using a wood facing 15 mm thick.
No load speed (min
-1
) ............................................................................................................................................. 4,500
Laser Type (LS0814FL only)................................................................................... Red Laser, < 1mW ( Laser Class 2 )
Dimensions (L x W x H) .....................................................................................................677 mm x 430 mm x 520 mm
Net weight .......................................................................................................................................... LS0814 ••• 13.6 kg
......................................................................................................................................................... LS0814F ••• 13.9 kg
....................................................................................................................................................... LS0814FL ••• 14.2 kg
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols
END210-3
The following show the symbols used for the tool. Be sure that you understand their meaning before use.
...................Read instruction manual.
...................DOUBLE INSULATION
...................To avoid injury from flying debris,
keep holding the saw head down,
after making cuts, until the blade has
come to a complete stop.
..............................When performing slide cut, first pull
carriage fully and press down handle,
then push carriage toward the guide
fence. For your safety, remove chips,
small pieces, etc. from the table top
before operation.
................For your safety, remove chips, small
pieces, etc. from the table top before
operation.
................Do not place hand or fingers close to
the blade.
........Never look into the laser beam.
Direct laser beam may injure your
eyes.
Miter angle
Bevel angle
45° (left) 0° 45° (right)
0°
* 50 mm x 262 mm Note 1 * 75 mm x 262 mm Note 1 * 30 mm x 262 mm Note 1
47 mm x 312 mm 65 mm x 312 mm 20 mm x 312 mm
45° (left and right)
* 50 mm x 180 mm Note 2 * 75 mm x 180 mm Note 2 * 30 mm x 180 mm Note 2
47 mm x 220 mm 65 mm x 220 mm 20 mm x 220 mm
57° (right) -----
* 75 mm x 142 mm Note 3
-----
65 mm x 169 mm