16 ENGLISH
Emptying the grass basket
WARNING:
To reduce a risk of accident, regu-
larly check the grass basket for any damage or weak-
ened strength. Replace the grass basket if necessary.
1.
Release the switch lever.
2.
Remove the battery cartridge.
3.
Open the rear cover and take out the grass basket
by holding the handle.
1
2
Fig.27
►
1.
Rear cover
2.
Handle
4.
Empty the grass basket.
MAINTENANCE
WARNING:
Always be sure that the battery
cartridge is removed from the machine before
storing or carrying the machine or attempting to
perform inspection or maintenance.
WARNING:
Wear gloves when performing
inspection or maintenance.
WARNING:
Always wear the safety goggles or
safety glasses with side shields when performing
inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Maintenance
1.
Remove the battery cartridge, and then close the battery cover.
2.
Put the mower on its side. Clean grass clippings
accumulated on the underside of mower deck.
3.
Pour water toward the bottom of the machine to
which the blade is attached.
NOTICE:
Do not wash the machine with high
pressure water.
4.
Check all nuts, bolts, screws, etc. for tightness.
5.
Inspect moving parts for damage, breakage, and wear.
Damaged or missing parts should be repaired or replaced.
6.
Store the mower in a safe place out of the reach of
children.
Storage
CAUTION:
When putting the machine in the
upright position, place the machine on a flat and
stable surface.
If the machine is placed on an unsta-
ble surface, the machine may fall over and cause an
injury.
Store mower indoors in a cool, dry and locked place.
Don't store the mower and charger in locations where
the temperature may reach or exceed 40 °C.
1.
Remove the battery cartridge.
2.
Remove the grass basket.
3.
Unfold the clamping levers, then fold the handle,
and then fold the clamping levers.
1
Fig.28
►
1.
Clamping lever
4.
Loosen the thumb nuts of the handle, and then
fold the upper handle.
1
2
Fig.29
►
1.
Thumb nut
2.
Upper handle
