Makita JV0600, Инструкция по эксплуатации, Страница: 4 / 60

4
ENGLISH (Original instructions)
Explanation of general view
1-1. Cutting action changing lever
2-1. Switch trigger
2-2. Lock button
3-1. Speed adjusting dial
4-1. Blade holder
4-2. Blade
4-3. Fixed position
4-4. Released position
5-1. Blade clamp lever
6-1. Wrench holder
6-2. Hex wrench
7-1. Cutting line
7-2. Base 9-1. Hex wrench
9-2. Bolt
9-3. Base
10-1. Edge
10-2. Graduation
11-1. Base
11-2. Hex wrench
11-3. Bolt
12-1. Starting hole
15-1. Hose
16-1. Rip fence (Guide rule)
17-1. Bolt
17-2. Fence guide 17-3. Hex wrench
17-4. Rip fence (Guide rule)
18-1. Threaded knob
18-2. Pin
18-3. Rip fence (Guide rule)
18-4. Fence guide
19-1. Rip fence (Guide rule)
20-1. Anti-splintering device
20-2. Tool base
21-1. Cover plate
21-2. Tool base
SPECIFICATIONS
Model JV0600
Length of stroke 23 mm
Blade type B type
Wood 90 mm
Max. cutting capacities
Mild steel 10 mm
Strokes per minute (min
-1
) 500 - 3,100
Overall length 236 mm
Net weight 2.4 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE019-1
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 85 dB (A)
Sound power level (L
WA
) : 96 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : cutting boards
Vibration emission (a
h,B
) : 10.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : cutting sheet metal
Vibration emission (a
h,M
) : 5.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.