background image

14 ENGLISH

3.

  Slide the rip fence to the desired cutting radius, 

and tighten the bolt to secure it in place.

NOTE:

 Always use jig saw blades No. B-17, B-18, 

B-26 or B-27 when cutting circles or arcs.

Guide rail adapter set

Optional accessory

When cutting parallel and uniform width or cutting 

straight, the use of the guide rail and the guide rail 

adapter will assure the production of fast and clean 

cuts. To install the guide rail adapter, insert the rule 

bar into the square hole of the base as far as it goes. 

Secure the bolt with the hex wrench securely.

1

2

3

Fig.28

►     

1.

 Hex wrench 

2.

 Rule bar 

3.

 Bolt

Insert the rule bar into the square hole of the guide rail 

adapter, and secure the screw firmly. Place the guide 

rail adapter on the guide rail.

1
2

3

Fig.29

►     

1.

 Guide rail adapter 

2.

 Guide rail 

3.

 Screw

NOTICE:

 Always use jig saw blades No. B-8, B-13, 

B-16, B-17 or 58 when using the guide rail and the 

guide rail adapter.

MAINTENANCE

CAUTION:

 

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before attempting to perform inspection or 

maintenance.

NOTICE:

 

Never use gasoline, benzine, thinner, 

alcohol or the like. Discoloration, deformation or 

cracks may result.

To maintain product SAFETY and RELIABILITY, 

repairs, any other maintenance or adjustment should 

be performed by Makita Authorized or Factory Service 

Centers, always using Makita replacement parts.

OPTIONAL 

ACCESSORIES

CAUTION:

 

These accessories or attachments 

are recommended for use with your Makita tool 

specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service 

Center.
• 

Jig saw blades

• 

Hex wrench 4

• 

Rip fence (guide rule) set

• 

Guide rail adapter set

• 

Guide rail set

• 

Anti-splintering device

• 

Cover plate

• 

Dust nozzle assy

• 

Makita genuine battery and charger

NOTE:

 Some items in the list may be included in the 

tool package as standard accessories. They may 

differ from country to country.

Содержание JV001G

















Отзывы: