Makita HTR4901, Инструкция по эксплуатации

Страница: 12 / 60

12
How to change the angle
– Return the throttle lever, and rotate the rear handle, push the rotation lever.
– Rotate the rear handle to the right or left by 90 degrees.
– After rotation, release the lock pin. To secure the rear handle, hold the
rotation lock pin gently by the finger.
NOTE: For safety, the stopper works to catch the throttle lever during rotation
of the handle. Rotate the rear handle after complete rotation by 90
degrees.
Vertical operation
– In rotating the rear handle to the right, hold the rear handle by the right hand,
and the front handle by the left hand. Perform cutting in a circle.
– In rotating the rear handle to the left, hold the front handle by the right hand,
and the rear handle by the left hand. Perform cutting in a circle.
ANGLE CHANGE OF REAR HANDLE
To permit vertical operation of the unit, the angle of the rear handle is designed to be changed.
Rotation lever