3. Loosen M6x20 Hex bolt using
Lever 45, then remove E-8 Bow
stop ring with a slotted screwdriver.
6. Base can now be separated from the machine.
7. Base can be replaced after removing Top guide,
Lock levers, and four M6x8 Hex socket set screws.
4. Remove M6x20 Hex bolt
by using Lever 45 as a tool,
then remove Flat washer 6.
5. Loosen M6x8 Hex socket set screw,
then remove Shoulder pin 6-7 that
functions as a hinge.
P
3
/1
6
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base
Fig. 2
DISASSEMBLING
Set the cutting depth of the machine to maximum, and remove saw blade.
Then remove both Rear angular guide section and Angular guide section from Base. Base can now be replaced. (
Fig. 2
)
Lever 45
M6x20 Hex bolt
Flat washer 6
M6x8 Hex socket
set screw
M6x8 Hex socket
set screw
(4 pcs.)
Top guide
Lock lever
Lock lever
M5x8 Pan hd. screw
M6x20 Flat head
square neck bolt
1. Unscrew M6 Thumb nut, then remove Flat washer 6
and M6x20 Flat head square neck bolt.
M6 Thumb nut
Rear Angular Guide Section
(on the rear of the machine)
Angular Guide Section
(on the front of the machine)
Flat washer 6
M6x8 Hex socket
set screw
Shoulder pin 6-7
Shoulder pin 6-7
2. Loosen M6x8 Hex socket set crew with Hex wrench,
remove Shoulder pin 6-7 that functions as a hinge.
Base
E-8 Bow stop ring
Lever 45
M6x20 Hex bolt
