W
iring diagram
P 18/ 19
Fig. D-2
HR3540C
Controller
Dial
Lead wire of
Power supply cord
Rib
Switch
Do not slack the Lead wires in this area.
Fix them with Lead wire holders and Ribs.
Do not put the Lead wires of Power supply cord
on the Ribs (A) and (B).
(A) Rib for Controller
(B) Rib of Motor
housing
Power supply cord
Cord guard
Connector of
Lead unit
Lead unit
Lead wire holder
Rote the Lead wires of Lead unit
through the opening of Handle.
Handle
Motor housing
Motor housing (Bottom view)
Lead wire holder
Route the Lead wire as
illustrated on left. Fix it
with Lead wire holder.
Do not slack it between
LED circuit and Lead
wire holder.
Controller
Rib
Rib
Rib
LED Circuit
Motor Housing (Rear View)
Motor Housing (Rear View)
Dial
(C) Rib A of
Motor housing
Rib B of
Motor housing
Route Lead wire of Light circuit between (B) and (C).
Do not put Lead wire of Light circuit on the Rib B of Motor
housing.
Lead wire of
Light circuit
(B) Rib of
controller
* Put the extra portion of the Lead wire of Light
circuit into the space between Rib of Motor
housing and Rib for Controller.
* Put Connector into Cord clamp base.
Cord clamp
base
Rib of Motor housing
Rib for Controller
(after assembling Cord Clamp Base)
Rib for Controller
Controller
Connector
Controller
HR3541FC
