Makita HR3210FCT, Инструкция по эксплуатации, Страница: 5 / 12

5 ENGLISH
Changing the quick change chuck
for SDS-plus
For Model HR3210FCT
The quick change chuck for SDS-plus can be easily
exchanged for the quick change drill chuck.
Removing the quick change chuck
for SDS-plus
1
2
3
1
2
► 1. Quick change chuck for SDS-plus 2. Change
cover 3. Chuck cover
CAUTION:
• Before removing the quick change chuck for
SDS-plus always remove the bit.
Hold the change cover with the thumb and the mid-
dle finger and pull it in the direction arrow 1. With the
change cover pulled in that direction, hold the chuck
cover with the index finger. While holding the chuck
cover so, pull out the quick change chuck for SDS-plus
in the direction of arrow 2 at a stroke.
Attaching the quick change drill
chuck
1
2
3
► 1. Spindle 2. Quick change drill chuck 3. Change
cover
Grasp the change cover and place the quick change
drill chuck on the spindle of the tool.
Make sure that the quick change drill chuck is secured
by trying to pull it several times.
Selecting the action mode
Rotation with hammering
1
2
3
►
1.
Lock button
2.
Pointer
3.
Change lever
For drilling in concrete, masonry, etc., depress the lock
button and rotate the change lever so that the pointer
points to the symbol. Use a tungsten-carbide tipped
bit.
Rotation only
1
2
3
► 1. Lock button 2. Change lever 3. Pointer
For drilling in wood, metal or plastic materials, depress
the lock button and rotate the change lever so that the
pointer points to the symbol. Use a twist drill bit or
wood bit.
Hammering only
1
2
3
► 1. Pointer 2. Change lever 3. Lock button