Makita HR2631F, Инструкция по эксплуатации

Страница: 3 / 16

3
Model HR2631FT
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 11.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : chiselling function with side grip
Vibration emission (a
h,Cheq
) : 8.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Model HR2641
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 11.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : chiselling function with side grip
Vibration emission (a
h,Cheq
) : 9.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model HR2320T
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 15.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : chiselling function with side grip
Vibration emission (a
h,Cheq
) : 10.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Model HR2630
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 15.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : chiselling function with side grip
Vibration emission (a
h,Cheq
) : 9.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model HR2630T
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 15.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : chiselling function with side grip
Vibration emission (a
h,Cheq
) : 9.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-18
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Combination Hammer
Model No./ Type: HR2631F, HR2631FT, HR2641,
HR2320T, HR2630, HR2630T
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium