![background image](http://html1.mh-extra.com/html/makita/hr004gz/hr004gz_instruction-manual_4196081015.webp)
15 ENGLISH
Installing or removing the dust
collection system
Optional accessory
To install the dust collection system, insert the tool into the dust collec-
tion system all the way until it locks in place with a little double click.
To remove the dust collection system, pull the tool while
pressing the lock-off button.
1
►
1.
Lock-off button
Dust cup
Optional accessory
Use the dust cup to prevent dust from falling over the tool and
on yourself when performing overhead drilling operations.
Attach the dust cup to the bit as shown in the figure. The size
of bits which the dust cup can be attached to is as follows.
Model
Bit diameter
Dust cup 5
6 mm - 14.5 mm
Dust cup 9
12 mm - 16 mm
1
►
1.
Dust cup
Dust cup set
Optional accessory
Before installing the dust cup set, remove the bit from
the tool if installed.
Install the dust cup set on the tool so that the
sym-
bol on the dust cup is aligned with the groove in the tool.
2
1
►
1.
symbol
2.
Groove
NOTE:
If you connect a vacuum cleaner to the dust
cup set, remove the dust cap before connecting it.
1
►
1.
Dust cap
Содержание HR004GZ
Страница 27: ...27 ...