2
ENGLISH (Original instructions)
SPECIFICATIONS
Model HKU01
Dimensions
1,193 mm (47") x 488 mm (19-1/4") x 998 mm (39-1/4")
Blade diameter
245 mm (9-5/8")
Tilling width
350 (13-3/4") (225 (8-7/8") separated)
No load speed (RPM)
85 /min
Net weight
23.3 kg (51.4lbs)
Rated voltage
D.C. 36 V
Standard battery cartridge and charger
BL3626
BL3622A
Always keep the combinations of battery/charger on the right columns.
DC36RA DC36WA
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
USB107-2
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: When using electric gardening
appliances, basic safety precautions should always
be followed to reduce the risk of fire, electric shock,
and personal injury, including the following safety
instructions.
Read all instructions and
warnings.
1.
Avoid dangerous environment - Don’t use
appliances in damp or wet locations.
2.
Don’t use in rain.
3.
Dress properly - Do not wear loose clothing or
jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear
is recommended when working outdoors. Wear
protective hair covering to contain long hair.
4.
Use safety glasses - Always use face or dust
mask if operation is dusty.
5.
Use right appliance - Do not use appliance for
any job except that for which it is intended.
6.
Avoid unintentional starting - Don’t carry
battery-installed appliance with finger on
switch. Be sure switch is off when installing
batteries.
7.
Don’t force appliance - It will do the job better
and with less likelihood of a risk of injury at
the rate for which it was designed.
8.
Don’t overreach - Keep proper footing and
balance at all times.
9.
Stay alert - Watch what you are doing. Use
common sense. Do not operate appliance
when you are tired.
10.
Store idle appliances indoors - When not in
use, appliances should be stored indoors in
dry, and high or locked-up place - out of reach
of children.
11.
Maintain appliance with care - Keep cutting
edge sharp and clean for best performance
and to reduce the risk of injury. Follow
instructions for lubricating and changing
accessories. Keep handles dry, clean, and free
from oil and grease.
12.
Check damaged parts - Before further use of
the appliance, a guard or other part that is
damaged should be carefully checked to
determine that it will operate properly and
perform its intended function. Check for
alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any
other condition that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced by an authorized
service center unless indicated elsewhere in
this manual.
13.
Keep hands away from blades.
Training/ Information
1.
Do not insert key into the equipment until it is
ready to be used.
2.
Be familiar with the controls and proper use of
the equipment.
3.
Never allow children or people unfamiliar with
the instructions to use the machine. Local
regulations can restrict the age of the operator.
4.
Never work while people, especially children,
or pets are nearby.
5.
Keep in mind that the operator or user is
responsible for accidents or hazards
occurring to other people or their property.
Содержание HKU01
Страница 45: ...45 ...
Страница 46: ...46 ...
Страница 47: ...47 ...
Страница 48: ...48 Makita Corporation 3 11 8 Sumiyoshi cho Anjo Aichi 446 8502 Japan www makita com 885121 944 HKU01 1 ...