- 4 -
Features - Getting started
HG 6020
The tool is switched ON and OFF at the two-stage switch
(6)
on the back of the grip handle. In addition to
three-stage speed/airflow control (stage 1 is a cold-air stage at 50 °C ), temperature can be continuously
adjusted over a range of 50 °C – 600 °C at the thumbwheel
(7)
. The numbers (1 to 9) on the thumbwheel
serve as a guide only. Whereas ”1” means 50 °C, the maximum temperature of 600 °C is attained at ”9”. Airflow
can be adjusted to the three stages. The guard sleeve
(3)
detaches at a bayonet catch.
Please note:
The distance from the object you are working on depends on material and intended method
of working. Always try out the airflow and temperature on a test piece first! Using the attachable accessory
nozzles (see accessories page on the cover) the flow of hot air can be controlled with maximum precision.
Take care when changing hot nozzles!
When using the heat gun in the self-resting position, make sure
it is standing on a stable, non-slip and clean surface.
Temperature
Dial Setting
1
2
3
4
5
6
7
8
9
Temperature
Range °F
100 – 160 °F
200 – 300 °F
375 – 475 °F
475 – 575 °F
600 – 70 0 °F
725 – 825 °F
850 – 9 50 °F
975 – 1075 °F
1025 – 1125 °F
Temperature
Range °C
38 –
71 °C
93 – 149 °C
191 – 246 °C
246 – 302 °C
316 – 371 °C
385 – 441 °C
454 – 510 °C
524 – 579 °C
552 – 607 °C
Sample
Applications
cleaning surfaces
activating adhesives
shaping/removing flooring materials
welding PE, LDPE, PP, thawing pipes
welding ABS, PBT, PC; lap welding plastic sheeting
de-soldering circuit boards
stripping paint, loosening nuts/screws
de-soldering copper pipes
soldering
Mains voltage
Output
Stage
Airflow (l/min)
Temperature (°C)
Temperature setting
Temperature display
Protection class
(without earth terminal)
Overheating protection
120– 127 V, 50-60 Hz
1500 W
1
2
3
100
215
350
50
50 – 600
continuous in 9 steps
by thumbwheel
–
II
thermal cut-out only
HG 6020
Technical specifications
Subject to technical modifications
230 – 240 V, 50-60 Hz
2000 W
1
2
3
150
300
500
50
50 – 600
continuous in 9 steps
by thumbwheel
–
II
thermal cut-out only
HG 6020
CE
Declaration of Conformity
This product complies with:
Low Voltage Directive 2006/95/EC / EMC Directive 2004/108/EC / RoHS Directive 2011/65/EC.
Makita_HG 6020 SAA-SAB_ENG_FRA_ESP_Makita_HGs_USA_ENU_ESP.qxp 12.12.13 09:23 Seite 4