8
ENGLISH
Insert screwdriver into the hole in the inner lange. Grip
the hex nut with the wrench, turning in the direction
of wheel rotation to loosen the hex nut. Remove the
hex nut and outer lange. Then install the wheel, outer
lange and hex nut.
Tighten the hex nut in the direction of arrow as shown
in the igure.
OPERATION
CAUTION:
•
Apply light pressure on the tool. Excessive
pressure on the tool will only cause a poor inish
and overloading of the motor.
•
The grinding wheel continues to rotate after the
tool is switched off.
•
Hold the tool irmly with one hand on the switch
handle and the other hand on the front grip
when performing the tool.
Hanger (optional accessory)
Continuous operation of the grinder is made easy by
using the handy hanger as shown in the igure. Simply
loop the cord over the head or shoulder, after threading
it through the eyelet on the top of the tool housing.
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
•
Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
1
2
1.
Exhaust vent
2.
Inhalation vent
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed.
Installing or removing dust cover
(optional accessory)
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before installing or removing the dust
cover attachments.
•
Failure to do so causes damage to the tool or a
personal injury.
•
Clean the dust cover attachments when the low
of the air through the dust cover attachments
becomes obstructed with built up dust or foreign
matters. Continued operation in such a condi-
tion may damage the tool.
•
When removing the dust cover attachments,
forcing it up without unhooking hook A or B may
break hooking part.
1
2
4
3
1.
Handle R
2.
Dust cover attachment R
3.
Handle L
4.
Dust cover attachment L
Содержание GS5000
Страница 11: ...11...
