12 ENGLISH
Setting the clock time and date
1. Press and hold the Menu/Info button.
2. Rotate the Tuning control knob until “CLOCK ADJ”
appears on the display. Press the Tuning control knob
to enter the setting.
3. The hour setting on the display will begin flashing.
Rotate the Tuning control knob to select the desired
hour, and press the Tuning control knob to confirm the
setting. Then rotate the Tuning control knob to select
the desired minute, and press the Tuning control knob
to confirm the setting.
4. Rotate the Tuning control knob until “DATE ADJ”
appears on the display. Press the Tuning control knob
to enter the setting.
5. Rotate the Tuning control knob to select the desired
year and press the Tuning control knob to confirm the
setting. Then rotate the Tuning control knob to select
the desired month, and press the Tuning control knob
to confirm the setting. Then rotate the Tuning control
knob to select the desired date and press the Tuning
control knob to confirm the setting.
Radio Data System (RDS)
When you set the clock time using the RDS function, your
radio will synchronize its clock time whenever it tunes to a
radio station using RDS with CT signals.
1. When tuning to a station transmitting RDS data, the
RDS symbol will be shown on the display. Press and
hold the Menu/Info button.
2. Rotate the Tuning control knob until “RDS CT” and a
clock symbol appear on the display. Press the Tuning
control knob to enter the setting.
3. Rotate the Tuning control knob until “RDS CT” appears
on the display. Press the Tuning control knob to confirm
the setting. The clock time of the radio will set up
automatically according to the RDS data received.
Note:
●
The radio clock time will be valid for 5 days each time
the radio time is synchronized with RDS CT.
●
To disable the RDS CT function, go back to step 1 to
2 and then rotate the Tuning control knob to select
“MANUAL” option. Press the Tuning control knob to
confirm the setting.
Setting the alarm clock
Your radio has two alarms which can each be set to wake
you to AM/FM radio or buzzer alarm. The alarms may be
set while the unit is in standby mode or while playing.
Note:
Ensure that the time is set correctly before setting the
alarms. If no buttons are pressed for 10 seconds, the
radio will exit the alarm setup.
a. Setting radio alarm time:
1. The radio alarm can be set either when radio is on or
off.
2. Press and hold the radio alarm button, the radio alarm
symbol and the display hour will flash along with a
beep.
3. During radio alarm symbol flashes, rotate the Tuning
control knob to select the hour and press the Tuning
control knob again to confirm the hour setting. Then
rotate the Tuning control knob to select the minute and
press the Tuning control knob to confirm the minute
setting.
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE – the alarm will sound once.
DAILY – the alarm will sound everyday.
WEEKDAY – the alarm will sound only on weekdays.
WEEKEND – the alarm will sound only at weekends.
Press the Tuning control knob to confirm the setting.
5. During radio alarm symbol is flashing, rotate the Tuning
control knob to select desired wake-up band and
station, then press the Tuning control knob to confirm
the selection.
6. Rotate the Tuning control knob to select the desired
volume and press the Tuning control knob to confirm
the volume. Radio alarm setting is now completed.
Note:
●
If new radio alarm station is not selected, it will select
the last alarm station.
●
If the selected AM/FM alarm station is not available
when the alarm is sounding, the buzzer alarm will be
used instead.
b. Setting HWS (Humane Wake System) buzzer alarm:
A beep tone will activate when selecting the HWS buzzer
alarm.
The alarm beep will sound shorter every 15 seconds
for one minute followed by one minute silence before
repeating the cycle.
1. The buzzer alarm can be set either when the radio is
on or off.
2. Press and hold the buzzer alarm button, the symbol
and the display hour will flash along with a beep.
3. During buzzer alarm symbol flashes, rotate the Tuning
control knob to select the hour and press the Tuning
control knob again to confirm the hour setting. Then
rotate the Tuning control knob to select the minute and
press the Tuning control knob to confirm the minute
setting.
4. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE – the alarm will sound once.
Содержание GRM02
Страница 1: ...GRM02 EN Job Site Radio Instruction manual 5 ESMX Radio de Trabajo Manual de instrucciones 16 ...
Страница 2: ...2 ENGLISH 1 6 5 4 2 16 17 12 13 15 3 1 14 20 18 19 7 8 9 10 11 G H I A B C D E F 21 22 23 24 ...
Страница 3: ...3 ENGLISH 1 2 1 2 2 4 6 7 3 XGT LXT LXT CXT XGT 5 ...
Страница 4: ...4 ENGLISH 1 2 8 9 CXT ...
