7 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
GA7080 GA7081 GA7082 GA9080 GA9081 GA9082
Wheel diameter
180 mm
230 mm
Max. wheel thickness
7.2 mm
6.5 mm
Spindle thread
M14 or M16 or 5/8″
Rated speed (n)
8,500 min
-1
6,600 min
-1
Overall length
509 mm
461 mm
509 mm
461 mm
Net weight
6.3 -
6.8 kg
6.1 -
6.6 kg
6.0 -
6.5 kg
6.5 -
8.6 kg
6.3 -
8.4 kg
6.2 -
8.3 kg
Safety class
/II
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s). The lightest and heaviest combinations, according to
EPTA-Procedure 01/2014, are shown in the table.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
For public low-voltage distribution
systems of between 220 V and 250 V
Only for model GA7082 / GA9082
Switching operations of electric apparatus cause volt-
age fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.20 Ohms it can be pre
-
sumed that there will be no negative effects. The mains
socket used for this device must be protected with a
fuse or protective circuit breaker having slow tripping
characteristics.
Noise
The typical A-weighted noise level determined according to EN60745-2-3:
Model
Sound pressure
level (L
pA
) : (dB(A))
Sound power level
(L
WA
) : (dB(A))
Uncertainty (K) :
(dB(A))
GA7080
91
102
3
GA7081
91
102
3
GA7082
91
102
3
GA9080
92
103
3
GA9081
92
103
3
GA9082
92
103
3
NOTE:
The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val
-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Содержание GA7080
