P
5
/
9
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Armature, Small spiral bevel gear, Ball bearing 6301DDW (cont.)
ASSEMBLING
(2) Assemble Ball bearing 6301DDW to Gear housing complete as illustrated in Fig. 8.
(3) Assemble Armature and small Spiral bevel gear to Gear housing complete as illustrated in Fig. 9.
Fig. 8
Armature with Ball
bearing 6301DDW
Armature
Assemble Ball bearing 6301DDW to
Armature temporarily.
After setting Ball bearing 6301DDW in
place of Gear housing complete, pull off
Armature.
Retaining
ring (INT) R-42
Flat washer 20
Make sure that Rubber
ring 38 is set in place.
(Refer to Fig. 7)
Putting Flat washer 20 on Ball
bearing 6301DDW, secure them
with Retaining ring (INT) R-42.
Rubber ring 38
1R005
Small spiral
bevel gear
M8
Hex nut
Armature
Ball bearing
6301DDW
Insert Armature shaft through Small spiral bevel gear
and Ball bearing 6301DDW in Gear housing.
Set M8 Hex nut to
Armature shaft.
Holding M8 Hex nut with Wrench 13,
turn Armature clockwise by hand firmly.
Fig. 9
(4) Assemble Gear housing complete to Motor housing, And assemble Bearing box section to Gear housing complete.
Reverse the disassembling step in Fig. 2.
Ball bearing
6301DDW
