P
5
/ 1
1
R
epair
ASSEMBLING
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Spiral bevel gear 37, Ball bearing 6201DDW, Ball bearing 696ZZ
Fig. A
Retaining
ring R-32
1R005
(1) Assemble Bearing box section in the order of Figs. A, B and D.
(2) Assemble Bearing box section to Gear housing.
Assembling Flat washer 12 and new Ball bearing 6201DDW to Bearing box.
And then secure them with Retaining ring R-32.
Correct
Wrong
grooved side
Facing the flat surface to the upper side,
put Labyrinth ring onto 1R031 and
assemble Spindle.
Labyrinth ring works as a shield against
dust.
If Labyrinth ring is assembled to Spindle
facing the groove surface to the upper side,
it does not work as a shield against dust.
flat side
Fig. B
Fig. C
Spiral bevel
gear 37
Bearing box
Ball bearing 696ZZ
Ring spring 11
Note: Ring spring 11 is deformed when removing.
Correct it with pliers after setting it to the groove
of Spindle.
Spindle
Assemble Spindle to Bearing
box by pressing with Arbor
press.
Assemble Spiral bevel
gear 37 by pressing
with Arbor press.
Assemble Ring spring 11 and Ball bearing 696ZZ
to Spindle.
Labyrinth ring
Fig. D
Spindle
New
Ball bearing
6201DDW
Flat washer 12
Bearing Box
