Makita FS4000X, Инструкция по эксплуатации, Страница: 6 / 12

6
CAUTION:
•
Do not look in the light or see the source of light
directly.
To turn on the lamp, pull the trigger. Release the trigger to
turn it off.
NOTE:
•
Use a dry cloth to wipe the dirt off the lens of lamp.
Be careful not to scratch the lens of lamp, or it may
lower the illumination.
Reversing switch action
A
B
1
009962
CAUTION:
•
Always check the direction of rotation before
operation.
•
Use the reversing switch only after the tool comes
to a complete stop. Changing the direction of
rotation before the tool stops may damage the tool.
This tool has a reversing switch to change the direction of
rotation. Move the reversing switch lever to the
position
(A side) for clockwise rotation or the position (B side)
for counterclockwise rotation.
Hook
1
009963
The hook is convenient for temporarily hanging the tool.
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing or removing the bit
For model FS4000, FS4200, FS4300, FS4300A,
FS6200, FS6300, FS6300A, FS6300R
To remove the bit, first remove the locator by pulling the
lock ring away from the gear housing.
1
2
009964
Grasp the bit with a pair of pliers and pull the bit out of the
magnetic bit holder. Sometimes, it helps to wiggle the bit
with the pliers as you pull.
To install the bit, push it firmly into the magnetic bit holder.
Then install the locator by pushing it firmly back onto the
gear housing.
1
3
2
4
010095
For model FS4000X, FS4300X, FS6300X
To remove the bit, first pull the locator out of the locking
sleeve. Then grasp the bit with a pair of pliers and pull the
bit out of the magnetic bit holder. Sometimes, it helps to
wiggle the bit with the pliers as you pull.
1
2
002653
To install the bit, push it firmly into the magnetic bit holder.
Then install the locator by pushing it firmly back onto the
locking sleeve.
1. Locator
2. Locking sleeve
1. Locator
2. Bit
3. Gear housing
4. Magnetic bit
holder
1. Lock ring
2. Gear housing
1. Hook
1. Reversing switch
lever