Makita FL Series, Руководство пользователя, Страница: 37 / 176

37
Setting item: “F/R lever: Forward position”, “F/R lever: Reverse position”
This app allows you to configure the settings to your preference at a maximum of seven phases while you are
operating the switch trigger. Use these fields to configure the settings.
The setting screen of forward rotation setting / reverse rotation setting is displayed by switching the tab.
When the F/R lever of the product is set to forward rotation, the product performs the operations set in “F/R
lever: Forward position”.
When the F/R lever of the product is set to reverse rotation, the product performs the operations set in “F/R
lever: Reverse position”.
The respective setting screen for each of the one to seven phases is displayed by switching the tab on the
setting screen of forward rotation setting / reverse rotation setting.
1. “Initialize”
To initialize the respective settings of forward rotation setting / reverse rotation setting to the factory default
condition, click the [Initialize] button.
(Only the settings displayed on the screen are initialized at this time. The product settings are not
changed.)
2. “Phase Parameter”
2-1. “Direction”
Set the rotation direction.
・
“CW”
・ “CCW”
2-2. “Speed”
Set the speed.
2-3. “Ignored Torque Time”
When “Torque” is set for “Pass Criteria for Phase” / “Failure Criteria for Phase”, you can set the time
during which the condition is not judged after this phase is started.
2-4. “Slowstart”
You can set the time to reach the speed set for “Speed” after this phase is started.