Makita EM4350UH, Техническая информация

Страница: 5 / 22

[4] DISASSEMBLY/ASSEMBLY
[4]-3. Shaft pipe complete (cont.)
R
epair
P / 2
For 4351UH:
(5A) Loosen M5x18 Hex socket head bolt and remove Shaft pipe complete from Pipe housing. (
Fig. 11
)
(6A) Pull out Shaft from Shaft pipe complete.
For 4350UH:
(5B) Remove two M6x25 Hex socket head bolts and Pipe clamp, then separate Bike handle section from Shaft pipe
complete. ( Fig. 12 )
(6B) Remove the following parts from Shaft pipe complete.
• Wire clamp (2 pcs.) • Hanger set • Shaft ( Fig. 13 )
For 4350LH:
(5C) Remove four M5x30 Hex socket head screws, then remove Handle clamp 28 and then remove Loop handle 28.
( Fig. 14 )
(6C) Loosen two M5x14 Hex socket head bolts, then separate Lever case set from Pipe shaft complete. ( Fig. 15 )
(7C) Remove the following parts from Pipe shaft complete.
• Hanger set • Spacer • Shaft
Fig. 11
Fig. 13 Fig. 14 Fig. 15
Fig. 12
DISASSEMBLING
M5x30 Hex socket
head screw (4 pcs.)
Handle clamp 28
Shaft
Shaft pipe
complete
Wire clamp (2 pcs.)
M5x18 Hex socket head bolt
Pipe housing
Hanger set
Loop handle 28
Pipe clamp
Bike handle section
Shaft pipe
complete
M5x14 Hex socket
head bolt (2 pcs.)
Control lever assembly
Shaft pipe
Shaft pipe complete
M6x25 Hex
socket head bolt