Makita EK7650H Скачать руководство пользователя страница 32

Страница: 32 / 92

THINGS YOU SHOULD KNOW ABOUT THE EMISSION CONTROL SYSTEM WARRANTY

MAINTENANCE AND REPAIRS

You are responsible for the proper use and maintenance of the engine. You should keep all receipts and maintenance records covering the

performance of regular maintenance in the event questions arise. These receipts and maintenance records should be transferred to each

subsequent owner of the engine.

Makita

reserves the rights to deny warranty coverage if the engine has not been properly maintained.

Warranty claims will not be denied, however, solely because of the lack of required maintenance or failure to keep maintenance records.

MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PERFORMED BY

ANY REPAIR ESTABLISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS MUST BE PERFORMED BY A DEALER

OR SERVICE CENTER AUTHORIZED BY

Makita

. THE USE OF PARTS THAT ARE NOT EQUIVALENT IN PERFORMANCE AND

DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF THE EMISSION CONTROL SYSTEM AND MAY

HAVE A BEARING ON THE OUTCOME OF A WARRANTY CLAIM.

If other than the parts authorized by

Makita

are used for maintenance replacements or for the repair of components affecting emission control,

you should assure yourself that such parts are warranted by their manufacturer to be equivalent to the parts authorized by Makita in their

performance and durability.

HOW TO MAKE A CLAIM

All repairs qualifying under this limited warranty must be performed by

a service dealer authorized by MAKITA

In the event that any emission-related part is found to be defective during the warranty period, you shall notify

MAKITA at the following

contacts and you will be advised of the appropriate warranty service dealer or service providers where the warranty repair can be

performed.

* For the nearest Makita service center, please visit www.makitatools.com

* For technical support or questions regarding operation of our tools and accessories call: 1-800-4-MAKITA

* Makita USA Inc. Corporate Office: 14930 Northam St. La Mirada, CA 90638-5753

(For Canada)

* For the authorized service center nearest you please refer to the local yellow pages directory under “tools”, or contact our customer service

department Tel 1-800-263-3734 (Canada only), or visit our web site www.makita.ca

* Makita Canada Inc. Head Office & Plant: 1950 Forbes Street, Whitby, ON L1N7B7.

Содержание EK7650H





























































































Результаты поиска

Содержание EK7650H

Отзывы:

Похожие инструкции для EK7650H

Бренды по названию

Популярные бренды

Makita EK7650H, Руководство владельца и по безопасности

Результаты поиска

Содержание EK7650H

Отзывы:

Похожие инструкции для EK7650H

Бренды по названию

Популярные бренды